Jinan plastering mortar is a very important part of house construction. In this process, if the raw materials are not standardized or the workmanship or operation of workers in the construction process is not standardized, the mortar plastering surface of the external wall may leak.

　　如在框架梁的底部与砌体的连接处，更容易发生开裂和渗漏。当填充墙,墙上是否建立直接从底梁的底部,而不是根据操作码的要求,可能发生变形由于砌体本身的重力效应,导致水平裂缝在墙上和其他问题。窗户或门框与墙壁的连接处也会发生渗漏。这是因为接触点填充不够均匀，间隙填充不够致密，容易导致泄漏。

　　For example, the connection between the bottom of frame beam and masonry is more likely to crack and leak. When filling the wall, whether the wall is built directly from the bottom of the bottom beam, rather than according to the requirements of the operation code, may cause deformation due to the gravity effect of the masonry itself, resulting in horizontal cracks on the wall and other problems. There will also be leakage at the joint between the window or door frame and the wall. This is because the filling of the contact point is not uniform, the gap filling is not dense enough, which is easy to cause leakage.

　　在一些建筑中，雨水通过窗框渗漏到室内也比较常见。此外，在外墙抹灰表面，由于砂浆收缩和施工过程中可能出现的不规范操作，抹灰局部出现空桶甚至裂缝，是造成渗漏的因素。

　　In some buildings, it is also common for rainwater to leak into the room through the window frame. In addition, on the plastering surface of the external wall, due to the mortar shrinkage and the possible non-standard operation in the construction process, the partial plastering appears empty barrels or even cracks, which is the cause of leakage.

　　以上就是济南抹面砂浆厂家为大家介绍的外墙渗漏部位及相关原因的介绍，想了解更多相关信息，欢迎访问网站：。

　　The above is Jinan plastering mortar manufacturer's introduction to the leakage part of the external wall and related reasons. For more information, please visit the website: 。