The dry mixed thin layer masonry mortar is made of polymer, organic admixture and other materials by a certain proportion through a specific process. The more common application is the wall that we often see. It is necessary to add this kind of material. What are its performance characteristics? Jinan plastering mortar manufacturer will introduce it to you.

　　薄层砌筑砂浆产品性能特点:

　　Performance characteristics of thin layer masonry mortar:

　　1. 薄层砌筑砂浆产品特性:

　　1. Product characteristics of thin layer masonry mortar:

　　使用非常方便，加水即可搅拌;高保水性;键的强度;高耐候性;抗裂性好，收缩率低;防火和隔热。

　　It is very convenient to use, and can be stirred with water; high water retention; bond strength; high weather resistance; good crack resistance, low shrinkage; fire prevention and heat insulation.

　　2. 薄层砌筑砂浆应用范围:

　　2. Application scope of thin layer masonry mortar:

　　薄层砌筑及抹灰层厚度一般为3~5mm，抹灰厚度不得超过8mm。

　　The thickness of thin layer masonry and plastering layer is generally 3-5mm, and the plastering thickness shall not exceed 8mm.

　　3.抹过程:

　　3. wipe the process:

　　门窗框架四周填缝→墙面清洗→垂直挂、方、抹灰糕、打孔补强→湿墙(内外)→薄层砌筑砂浆施工→维护→验收。

　　Caulking around the door and window frame → wall cleaning → vertical hanging, square, plastering cake, drilling and reinforcement → wet wall (inside and outside) → thin layer masonry mortar construction → maintenance → acceptance.

　　A)清理基面杂物。基层表面应清洁、不松动、无灰尘、无油脂等。松动和开裂的部分应提前凿出并修补，以免影响粘结强度。夏季施工或基层墙面较干燥时，施工时可适量先洒水湿润，及内湿外干即可。

　　A) Clean up the sundries on the base surface. The surface of the base course shall be clean, free from looseness, dust, grease, etc. Loose and cracked parts shall be chiseled out and repaired in advance to avoid affecting the bond strength. In summer, when the construction or the base wall surface is relatively dry, the construction can be watered properly first, and the internal humidity and external dryness can be achieved.

　　B)剪力墙界面进行基底粗化处理。提前用高压水枪冲洗表面，清除界面浮尘，第二天进行薄层抹灰。

　　B) The interface of shear wall is roughened. Wash the surface with high-pressure water gun one day in advance, remove the floating dust on the interface, and carry out thin plastering the next day.

　　C)薄层抹灰施工时，宜存活一次，厚度不得大于5mm。

　　C) During thin layer plastering construction, it is better to survive once, and the thickness shall not be greater than 5mm.

　　D)施工中与不同材料连接时，应粘贴耐碱玻纤网布。

　　D) When connecting with different materials during construction, alkali resistant glass fiber mesh shall be pasted.

　　E)地表水收集后及时进行表面处理。

　　E) Surface treatment shall be carried out in time after surface water collection.

　　F)薄层灰浆抹面施工完成后，可以自然养护，当环境异常干燥时可进行浇水养护。

　　F) After the construction of thin-layer mortar plastering is completed, it can be cured naturally. When the environment is abnormally dry, it can be cured by watering.

　　薄层砌筑砂浆的性能特点如上所述，更多相关内容咨询，济南抹面砂浆厂家欢迎您的咨询。

　　The performance characteristics of thin-layer masonry mortar are as described above. For more information, welcome to Jinan plastering mortar manufacturer.