dafa大发手机版_dafa手机版官网

欢迎您浏览济南dafa手机版官网,主营:济南腻子粉,济南石膏粉,济南抹面砂浆等建筑装饰材料,大量批发,欢迎咨询。

专注绿色建筑装饰材料

经营管理理念:让客户用的放心!

24小时服务热线:

13864111871

当前位置: 首页 - 新闻动态 > 公司新闻
公司新闻
联系我们

济南福华建材厂

联系人:吴老师 

电话:13864111871 

手机:13864111871
          0531-81901300
地址:山东省济南市高新开发区巨野河办事处山圈村西


喷粉刷砂浆的施工工艺是什么?

来源: 日期:2022-05-19 发布人:

粉刷砂浆大家都不陌生吧,一般采用改良的干粉砂浆,采用较好的石井水泥混合而成的 干粉材料,关于喷粉刷砂浆的施工工艺是什么呢,给大家简单的介绍一下:
It's no stranger to plastering mortar. Generally, the improved dry powder mortar is used and the dry powder material mixed with better stone well cement is used. What's the construction technology of machine spraying mortar? Let's give you a brief introduction:
粉刷砂浆产品特点:
Features of plastering mortar products:
1、现场加水搅拌即可施工,省工省料,施工方便,可明显提高施工效率,减小工作强度。
1. The construction can be carried out by adding water and mixing on site, which saves labor and materials and is convenient for construction. It can significantly improve the construction efficiency and reduce the work intensity.
2、产品质量可靠均匀,保证地面砂浆的强度,收缩低,减少收缩裂缝。
2. The product quality is reliable and uniform, ensuring the strength of the ground mortar, low shrinkage and reducing shrinkage cracks.
3、具有较高的施工性能,和易性好,施工滑爽,均匀平整。
3. It has high construction performance, good workability, smooth and even construction.
4、提高施工现场的整洁度,无需水泥、黄砂等大综原料的堆放场地,可节省大量人力。
4. Improve the cleanliness of the construction site without the storage yard of large comprehensive raw materials such as cement and yellow sand, which can save a lot of manpower.
粉刷砂浆施工工艺:
Construction process of plastering mortar:
1、面层砂浆的铺设宜在室内装饰工程基本完成后进行。
1. The laying of surface mortar should be carried out after the indoor decoration works are basically completed.
2、地面砂浆铺设时,应随铺随压实。抹平、压实工作应在砂浆凝结前完成。
2. When the ground mortar is laid, it shall be compacted at the same time. The leveling and compaction shall be completed before the mortar sets.
3、做踢脚线前,应弹好水平控制线,并应采取措施控制出墙厚度一致。踢脚线突出墙面厚度不应大于8 mm
3. Before making the skirting line, snap the horizontal control line, and take measures to control the thickness of the wall. The thickness of skirting line protruding from the wall shall not be greater than 8 mm
4、踏步面层施工时,应采取保证每级踏步尺寸均匀的措施,且误差不应大于10 mm。
4. During the construction of step surface layer, measures shall be taken to ensure the uniform size of each step, and the error shall not be greater than 10 mm.
5、地面砂浆铺设时宜设置分格缝,分隔缝间距不宜大于6 m。
5. When laying the ground mortar, the dividing joint should be set, and the spacing of the dividing joint should not be greater than 6 m.
6、地面面层砂浆凝结后,应及时养护,养护时间不应少于七天。
6. After the mortar on the ground surface is set, it shall be cured in time, and the curing time shall not be less than seven days.
7、地面砂浆施工完成后,应采取措施防止玷污和损坏。面层砂浆的抗压强度未达到设计要求前,应采取保护措施。
7. After the construction of ground mortar is completed, measures shall be taken to prevent contamination and damage. Protective measures shall be taken before the compressive strength of the surface mortar fails to meet the design requirements.
本文的精彩内容由济南抹面砂浆提供知识提供,本网站还有很多的精彩内容,更多的内容您可以点击进入:我们有专门的客服为您解答问题
The wonderful contents of this article are provided by Jinan plastering mortar. There are many wonderful contents on this website. You can click to enter more contents: We have special customer service to answer your questions