济南腻子粉为什么在加水后越搅就越稀呢？

Why does Jinan putty powder become thinner after mixing with water?

纤维素作为一种增稠剂保水剂在腻了上应用的，由于纤维素本身的触变性，腻子粉中纤维素的加入也导致了腻子加水后产生了触变性。这种触变性是由于腻子粉中组分呈松散结合的结构被破坏引起的。这种结构在静止时产生，在应力作用下拆散。也就是说在搅拌下粘度降低，在静止时粘度恢复。

Cellulose is used as a thickener and water-retaining agent on putty. Due to the thixotropy of cellulose itself, the addition of cellulose in putty powder also leads to thixotropy of putty after adding water. This thixotropy is caused by the destruction of the loosely bound structure of the components in the putty powder. This kind of structure is generated when it is still and is disassembled under the action of stress. That is to say, the viscosity decreases under stirring and recovers at rest.

腻子在批刮过程中比较沉是怎么回事？

What is the reason why the putty is relatively heavy in the process of scraping?

出现这种情况一般用的纤维素粘度过高，有的厂家用20万的来做腻子，这样做出的腻子因粘度偏高，所以在批刮时出现发沉的感觉。内墙腻子建议添加量为3—5公斤，粘度为8—10万。

In this case, the viscosity of cellulose used is generally too high. Some factories use 200000 yuan to make putty. The putty made in this way has a heavy feeling when scraping because of its high viscosity. The recommended amount of internal wall putty is 3-5 kg, and the viscosity is 8-100000.

冬天和夏天用同样的粘度纤维素做出的腻子和砂浆为什么感觉粘度不一样？

Why do putty and mortar made of cellulose with the same viscosity feel different in winter and summer?

由于产品的热凝胶性，决定了产品的粘度随温度的升高会逐渐降低的，当温度超过产品凝胶温度时，产品将会从水中析出的，从而失去粘度。夏天室温一般都到30度以上了，这和冬天的温度相差已经很多了，所以感觉粘度要低的。

Due to the thermal gelling property of the product, the viscosity of the product will gradually decrease with the increase of temperature. When the temperature exceeds the gel temperature of the product, the product will precipitate from the water, thus losing the viscosity. The room temperature in summer is generally above 30 degrees, which is much different from the temperature in winter, so I feel that the viscosity is lower.

建议夏天在产品应用时尽量选择产品粘度高一个规格的产品，或是增加纤维素的用量，再有就是选择产品凝胶温度高的产品，尽量选用MK牌号的产品，这个产品的凝胶温度一般在70度以上的。夏天尽量不要用甲基纤维素，其凝胶温度在55度左右，温度稍微偏高，其粘度就会受到很大的影响的。

It is recommended to select the product with a higher viscosity or increase the amount of cellulose in summer, and then select the product with a higher gel temperature, and try to select the product with MK brand. The gel temperature of this product is generally above 70 degrees. Try not to use methyl cellulose in summer. The temperature of its gel is about 55 degrees. If the temperature is slightly higher, its viscosity will be greatly affected.

在墙面室内装修全过程中，腻子粉是必不可少的原材料，它可以用于填充间隙及其填充不光滑的墙面，以保证墙面的平整美观大方，那么您有需求就来我们网站看看吧。

In the whole process of wall interior decoration, putty powder is an essential raw material. It can be used to fill gaps and non-smooth walls to ensure the smoothness and beauty of the wall. If you need it, please come to our website Take a look.