装修的各个流程，工序越多，说明越复杂，时间花费越长，精力也需要花费更多，所以总有些惫懒的装修工人们这里省一步那里省一步，但后装修出来的效果完全令人不满。其一，许多工人在批刮腻子前就会缺少界面剂涂刷这一步骤，认为这一步完全可以省去，但真的是这样吗？今天详细给大家讲解一下界面处理剂的重要作用和误区解答，一起来看看吧！

The more processes and procedures involved in decoration, the more complex it becomes, the longer the time and energy required. Therefore, there are always some lazy decoration workers who save a step here and there, but the results of the later decoration are completely unsatisfactory. Firstly, many workers may lack the step of applying interface agent before applying putty in batches, believing that this step can be completely omitted, but is it really the case? Today, we will explain in detail the important role and misconceptions of interface treatment agents. Let's take a look together!

为什么要使用济南界面处理剂？

Why use Jinan interface treatment agent?

使用界面剂可以使基层表面更加粗糙，增强其对基层的粘结力，避免抹灰层空鼓起壳，避免后期需要重做找平层和粉刷层的风险。所以说，界面剂主要就是可以在以下两种情况下起到关键作用：

The use of interface agents can make the surface of the base layer rougher, enhance its adhesion to the base layer, avoid hollowing and peeling of the plastering layer, and avoid the risk of needing to redo the leveling layer and painting layer in the later stage. So, the interface agent can mainly play a key role in the following two situations:

1.当墙面基层过度光滑

1. When the base layer of the wall is excessively smooth

墙体基层过于光滑时，会减弱墙体和腻子之间的粘结力，而界面剂的作用则主要是为了杜绝这些情况而导致的不良后果。光滑的墙面刷涂界面剂由于其优异的渗透性，能充分渗透基层表面，从而增加了墙体对腻子的附着力。

When the base layer of the wall is too smooth, it will weaken the bonding force between the wall and the putty, and the function of the interface agent is mainly to prevent the adverse consequences caused by these situations. Smooth wall brushing with interface agent can fully penetrate the surface of the base layer due to its excellent permeability, thereby increasing the adhesion of the wall to the putty.

2.当墙面过于疏松

2. When the wall is too loose

对于疏松墙面，刷涂界面剂可以对疏松的部位进行渗透加固，从而避免了刮涂腻子后产生空鼓脱落情况。

For loose walls, brushing interface agents can penetrate and reinforce the loose areas, thereby avoiding the occurrence of hollowing and peeling after applying putty.

当然，要完全发挥界面剂的效果，一些误区大家也必须避坑！

Of course, in order to fully utilize the effectiveness of interface agents, some misunderstandings must also be avoided!

使用界面剂的误区

Mistakes in using interface agents

1.界面处理剂涂刷越厚越好

1. The thicker the interface treatment agent is applied, the better

1.作为墙面基层处理材料，界面剂可以说是起到了承上启下的作用，能够巩固基底且让墙体基层与找平层紧密粘贴在一起。

As a wall base treatment material, the interface agent can be said to play a connecting role, consolidating the base and making the wall base and leveling layer tightly stick together.

2.界面剂的高渗透性可以使墙面基层与找平层紧密贴合，具有高渗透力的界面剂能深入渗透到墙面基层，待其固化后，将墙面基层牢牢封固住，使墙面基底变得更加坚实，防止后期墙面因浮灰、松散物等影响后面找平层材料与基层的粘结力；还可以防止后期找平层空鼓脱落。

2. The high permeability of the interface agent can make the base layer of the wall closely adhere to the leveling layer. The interface agent with high permeability can penetrate deeply into the base layer of the wall. After it solidifies, the base layer of the wall is firmly sealed, making the wall base more solid, and preventing the bonding force between the leveling layer material and the base layer of the later wall from being affected by floating ash, loose materials, etc; It can also prevent hollowing and falling off of the leveling layer in the later stage.

3.实际上，决定界面剂好坏的不是其涂刷遍数，而是它的渗透性能，所以小编建议大家，界面剂施工只要涂刷1-2遍即可，不过要记住满涂墙面，不要漏涂。

3. In fact, the quality of the interface agent is not determined by the number of times it is applied, but by its permeability. Therefore, the editor suggests that the interface agent construction only needs to be applied 1-2 times, but it is important to remember to fully apply the wall surface and not miss the application.

装修施工进场就刷界面处理剂？

Apply interface treatment agent upon arrival of decoration construction?

很多装饰公司或装修工人在进场后就开始涂刷界面处理剂，随后进行水电改造施工，然而这种施工顺序是错的。要知道，但凡装修现场施工涉及到水电改造工程，不论装饰公司如何力保文明施工，仍然没办法避免室内扬尘。

Many decoration companies or workers start applying interface treatment agents after entering the site, and then carry out water and electricity renovation construction. However, this construction sequence is incorrect. It should be noted that wherever the construction of decoration sites involves water and electricity renovation projects, no matter how much the decoration company strives to ensure civilized construction, there is still no way to avoid indoor dust.

而室内扬尘大部分会降落于在地面被工人清扫处理，一部分会通过开窗措施逸散于室外，一部分被阻隔在工人的口罩处，而还有一部分则会沉积于涂刷了界面剂的墙面。所以如果进行墙面找平时不对这些扬尘做清理的话，后期很有可能会出现开裂空鼓或脱落。所以涂刷界面剂的正确施工工序应放在水电改造做完之后，墙面找平工序之前。

Most of the indoor dust will fall on the ground and be cleaned by workers, some will escape to the outside through window opening measures, some will be obstructed by workers' masks, and some will deposit on the walls coated with interface agents. So if you don't clean up these dust during wall leveling, there is a high possibility of cracking, hollowing, or detachment in the later stage. So the correct construction process for applying interface agent should be placed after the completion of water and electricity renovation and before the wall leveling process.

以上就是界面剂的作用及使用界面剂的误区内容讲解了，希望能够给您好的帮助，更多事项就来我们网站咨询！

The above is an explanation of the functions of interface agents and the misunderstandings in using them. We hope it can be helpful for you. For more information, please come to our website consulting service